BAMF2500/5

2,500 Watt 5 Channel Amplifier

Class A/B  BAMF2500/5
Max Power (watts) 2,500
RMS Power 4Ω Bridged, 14.4V 2 x 250 + 1 x 600
RMS Power 2Ω, 14.4V 4 x 125 + 1 x 600
RMS Power 4Ω, 14.4V 4 x 100 + 1 x 400
Dimensions (2.125"h x 8.25"w) 16.875"
Bass Knob Included Included

12dB Crossovers
Filter out frequencies that could cause damage to speakers, or that subwoofers can't play via 12dB/octave slope high pass & low pass crossovers.
Remote Gain Control
The remote gain control allows amplifier level adjustment from a remote location in the vehicle.
Pre-Amp Outputs
Sending a single signal from your head unit to multiple amplifiers in your system is easy using the pass-thru pre-amp outputs
All MOSFET Amplifier
BAMF amplifiers use MOSFET transistors for the power supply & output stages. MOSFET transistors increase durability and longevity over bi-polar counterparts...
12db Bass Boost
Utilize a built in 45Hz bass boost for up to 12dB of gain. Get the most power from your BAMF amplifier.

Additional Features

  • All MOSFET Transistor Amplifier
  • Regulated PWM Power Supply
  • Die-Cast Aluminum Chassis
  • Jet Black Texture Coat Finish
  • Side Pre-Amp and Connections
  • Top Panel Status Indicators
  • Chassis Integrated Mounting Feet
  • 200mV-6V Low Level Inputs
  • Direct Input 4 ga. Power & 8 ga. Speaker Terminals
  • 2-Ohm Stable Class A/B Full Range
  • 1-Ohm Stable Class D Monoblocks
  • Monoblocks Strapable w/ 2 ohm
  • Variable 12dB Hi/Low/Subsonic Crossovers
  • Variable 12dB/18dB Bass Boost
  • 180° Phase Switch
  • Dash Mount Remote Gain Module
  • Tri-Mode Capable
  • Three-Way Protection Circuitry
  • Pre-Amp Outputs (ex. 1200/4)