BAMF Amplifiers

Sometimes you have to call them like you see them; these full MOSFET amplifiers will tear-up your ride and bring out your inner beast. You won't have one seal left in your car to keep water out!
This is a Bad Ass Mother Focker.

All MOSFET Amplifier
BAMF amplifiers use MOSFET transistors for the power supply & output stages. MOSFET transistors increase durability and longevity over bi-polar counterparts...
Variable 12dB Crossovers
Filter out frequencies that could cause damage to speakers, or that subwoofers can't play via 12dB/octave slope high pass, low pass, & subsonic crossovers.
Variable 12dB or 18dB Bass Boost
Utilize a built in 45Hz bass boost for 12dB or 18dB of gain. Get the most power from your BAMF amplifier.
Dash Mount Remote Gain Control
Select BAMF amplifiers include a dash mount remote gain control. The remote gain control allows amplifier level adjustment from a remote location in the vehicle.
Class A/B Full Range Max Power (watts) RMS Power 4Ω Bridged, 14.4V RMS Power 2Ω, 14.4V RMS Power 4Ω, 14.4V Dimensions (2.125"h x 8.25"w) Bass Knob Included
BAMF800/2 800 1 x 360 2 x 180 2 x 150 10.125" Included
BAMF1250/2 1,250 1 x 560 2 x 280 2 x 220 11.375" Included
BAMF1800/2 1,800 1 x 760 2 x 380 2 x 300 13.75" Included
BAMF2200/2 2,200 1 x 900 2 x 450 2 x 370 15" Included
BAMF2600/2 2,600 1 x 1,080 2 x 540 2 x 450 16.875" Included
BAMF1200/4 1,200 2 x 250 4 x 125 4 x 100 11.875" -
BAMF1600/4 1,600 2 x 360 4 x 180 4 x 150 13.75" -
BAMF2500/5 2,500 2 x 250 + 1 x 600 4 x 125 + 1 x 600 4 x 100 + 1 x 400 16.875" Included
Class D Monoblocks Chs. Power
Power
Power
MAX Power Length
(2.2"h x 8.3"w)
Remote Gain Included
BAMF2000/1D 1 600 900 1,200 2,000 11.375" Yes
BAMF4000/1D 1 1,200 1,700 2,200 4,000 13.75" Yes
BAMF5500/1D 1 1,700 2,500 3,200 5,500 16.875" Yes

General Features

  • All MOSFET Transistor Amplifier
  • Regulated PWM Power Supply
  • Die-Cast Aluminum Chassis
  • Jet Black Texture Coat Finish
  • Side Pre-Amp and Connections
  • Top Panel Status Indicators
  • Chassis Integrated Mounting Feet
  • 200mV-6V Low Level Inputs
  • Direct Input 4 ga. Power & 8 ga. Speaker Terminals
  • 2-Ohm Stable Class A/B Full Range
  • 1-Ohm Stable Class D Monoblocks
  • Monoblocks Strapable w/ 2 ohm
  • Variable 12dB Hi/Low/Subsonic Crossovers
  • Variable 12dB/18dB Bass Boost
  • 180° Phase Switch
  • Dash Mount Remote Gain Module
  • Tri-Mode Capable
  • Three-Way Protection Circuitry
  • Pre-Amp Outputs (ex. 1200/4)